Sony STR-DN1000 6: Preparing the receiver and the remote, 1, 2

36US
6: Preparing the receiver
and the remote
Connect the AC power cord (mains lead) to a
wall outlet.
Notes
•Before connecting the AC power cord (mains
lead), make sure that metallic wires of th e speaker
cords are not touching each other between the
SPEAKERS terminals.
•Connect the AC power cord (mains lead) firmly.
Before using the receiver for th e first time,
initialize the receive r by performing t he
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1Press ?/1 to turn off the
receiver.
2Hold down ?/1 for 5 seconds.
After “CLEARING” appears on the
display for a while, “CLEARED!”
appears.
All the settings you have changed or
adjusted are reset to the initial settings .
Connecting the AC power cord
(mains lead)
L
OUT
L
AC power cord (mains lead)
To the wall outlet
Performing initial setup
operations
MULTI CHANNEL DECODING
?/1
INPUT SELECTOR
MUTING
MASTER VOLUME
?/1