— Enjoying surround sound

This section describes how to obtain the best possible sound quality from your system.

Using only the front speakers

In this mode, the receiver outputs the sound from the front left and right speakers only. There is no sound from the subwoofer.

Enjoying higher fidelity sound

— AUTO FORMAT DIRECT

The Auto Format Direct (A.F.D.) mode allows you to select the decoding mode that you want for your audio sound.

Listening to 2-channel stereo sources (2CH STEREO)

Standard 2-channel stereo sources completely bypass the sound field processing and multi- channel surround formats are downmixed to 2 channels.

2CH

Press the 2CH button on the remote.

2CH ST. appears on the display and the receiver switches to the 2CH STEREO mode.

Notes

You can also use the SOUND FIELD button to perform this operation.

No sound is output from the subwoofer in the 2CH STEREO mode. To listen to the 2-channel stereo sources using the front left and right speakers, and a subwoofer, set to A.F.D. AUTO.

A.F.D. mode

Decoding mode

(display)

 

 

 

A.F.D. AUTO

As encoded

(A.F.D. AUTO)

 

 

 

PRO LOGIC

Dolby Pro Logic

(DOLBY PL)

 

 

 

PRO LOGIC II MOVIE

Dolby Pro Logic II

(PLII MOV)

 

 

 

PRO LOGIC II MUSIC

 

(PLII MUS)

 

 

 

Decoding the input audio signal automatically

In this mode, the receiver automatically detects the type of audio signal being input (Dolby Digital, DTS, standard 2-channel stereo, etc.) and performs the proper decoding if necessary. This mode presents the sound as it was recorded/ encoded, without adding any surround effects. However, if there are no low frequency signals (Dolby Digital LFE, etc.) it will generate a low frequency signal for output to the subwoofer.

A.F.D.

42GB