When the Select a Server screen appears
If no VAIO computer normally connected is set, the Select a Server screen appears. Use 
/
to select the VAIO computer to be connected, press the SELECT button, and then select
Connect.
To set the VAIO computer normally connected, see page 49.
To record a broadcast received by a different VAIO computerWhen there is more than one VAIO computer connected to the receiver, you can select the VAIO computer to which you want to connect. To do so, press the OPTIONS button. On the OPTIONS menu, select Select a Server, and then press the SELECT button. In the Select a Server screen, select the VAIO computer to be connected, select Connect, and then press the SELECT button. Recording is performed on the VAIO computer selected in the Select a Server screen.
3 Select the channel with the CH +/- buttons.
You can also press the ALT button so that it lights, and then change the channel with the number buttons.
For example, to change to channel 12, press number buttons 1 and 2 successively, and then press the orange ENTER button.
Note
The channels changes three to five seconds after you press the orange ENTER button.
4 Press the REC button.The screen pauses, and after a short delay recording starts. Recording stops automatically 30 minutes later.
To extend the recording time
Press the REC button. Each press increases the recording time by 30 minutes up to a maximum of 6 hours.
For example, to record for 2 hours, press the REC button four times.
To change the recording quality
Recording stops soon after. The display then freezes temporarily, but resumes normal display momentarily.
Notes
•When recording, it is not possible to change the recording mode (High Quality, Standard, Long Play). To change the recording mode, stop recording. For details see page 76.
•When recording, it is not possible to select a different function.
•When recording a programme on the VAIO computer, it is not possible to start playing the same programme from the beginning with Network Media.
•It takes approximately 20 seconds before pressing the REC or REC STOP button takes effect. Allow sufficient time to take this into account before you start recording.
•When recording stops, the display freezes for approximately 20 seconds.
To display and exit the screen display
Press the blue DISPLAY button. Each time you press the blue DISPLAY button, the screen display appears or disappears.