You can also select N.MEDIA by pressing INPUT SELECTOR
on the receiver.
A confirmation message in the selected language appears, prompting you to restart the receiver to apply the language change.
9 Press the SELECT button to close the message.
10 Press the ?/1 button to restart the receiver.
The Network Media function screen appears on the television. (The appearance of the screen depends on the Network Media default settings (page 52).)
If you follow the procedure described in “Useful setting 3: Setting the VAIO computer to start automatically” (page 53), if the VAIO computer is on standby or hibernating, the VAIO computer starts automatically when you use Network Media.
Note
For about 20 seconds after you connect the power cord, even if you switch the receiver input to N.MEDIA, nothing appears on the television screen.
Tip
to select OK, and then press the SELECT button.
Use / / /
8
Note
By default, the receiver language is English.
to select the desired language, and then press the SELECT button.
/ / /
Use
7
Press the ?/1 button on the remote to turn on the receiver.
Press the N.MEDIA button to set the receiver input to N.MEDIA.
The first time you use the receiver or after resetting it, the Language Select screen appears. If this is not the case, skip steps 7 to 10.
5
6
Turn on your television and select the input connected to the receiver.
Tip
If you are using a Sony television, you can turn on the television and select the input with the remote.
4
If you are using a hub or router equipped with a hub, turn it on. Turn on the VAIO computer.
Once the VAIO computer is running, start Giga Pocket Server.
Tip
We recommend that you add Giga Pocket Server to the Windows Start menu.
1
2
3
Step 5: Preparations needed to use Network Media
To be able to use Network Media, you must first start your VAIO computer, turn on your television, and then select the video input connected to the receiver.
?/1
N.MEDIA1) 1) Short for Network Media.