Using the receiver

— Basic operations

This section describes basic operations possible with the receiver.

Using

Selecting a component

1 Press INPUT SELECTOR repeatedly to select the input.

The selected input appears on the display.

To select the

Display

DVD player

DVD

 

 

VCR

VIDEO

 

 

Hard disk or MD deck

HDD/MD

 

 

Satellite tuner

TV/SAT

 

 

Network Media

N.MEDIA

 

 

Built-in tuner (FM)

Tuner (FM)

 

 

Built-in tuner (AM)

Tuner (AM)

 

 

Note

For details about how to use Network Media with the receiver, see chapter 3.

2 Turn on the selected component and start playback.3 Rotate VOLUME to adjust the volume.To mute the sound

Press MUTING to mute the sound. MUTING appears on the display when the sound is muted. To cancel muting, press it again, raise the volume or turn off the receiver.

Using headphones

Connect your headphone to the PHONES jack of the receiver. When you connect headphones the output to speakers is automatically interrupted.

Receiving radio broadcasts

Before receiving radio broadcasts, make sure that you connected the FM and AM antennae to the receiver (page 15).

Use the remote for the tuner operation.

Automatic tuning

If you do not know the frequency of the station that you want, you can let the receiver scan all the available stations in your area.

1 Press the FM or AM button repeatedly to select the FM or AM band.

You can also use INPUT SELECTOR on the system. The last station received is tuned in.

2 Press the TUNING MODE buttonrepeatedly to select AUTO T..3 Press the TUNING + or TUNING – button.

Press the TUNING + button to scan from low to high; press the TUNING – button to scan from high to low.

The receiver stops scanning whenever a station is received.

When the receiver reaches either end of the band

Scanning is repeated in the same direction.

4 To continue scanning, press the TUNING + or TUNING – button again.
receiver the

continued

37GB