xSynchronized recording
This function lets you conduct synchronized recording between the selected source and recorder components.
1Set the function selector on the amplifier (or receiver) to the source component.
2Set the source component to pause mode (make sure both the N and X indicators light together).
3Set the recorder component to the REC- PAUSE mode.
4Press PAUSE on the recorder component.
The source component is released from the pause mode, and recording begins shortly thereafter.
When playback ends from the source component, recording stops.
Notes
•Do not set more than one component to the pause mode.
•Certain recorder components may be equipped with a special synchronized recording function that uses the CONTROL A1
Control System, like “CD Synchro Dubbing”. In this case, refer to the operating instructions supplied with the recorder component.
Operations Other