CONTROL A1
control system (continued)
Jacks and connection examples
CONTROL A1
CONTROL A1 | CD player |
MD deck
On CONTROL A1 jacks and connections
It is possible to make connections between CONTROL A1 and CONTROL A1
jacks. For details regarding particular connections or set up options, refer to the operating instructions supplied with the component(s).
About the connecting cord
Some CONTROL A1 compatible components are supplied with a connecting cord as an accessory. In this case, use the connecting cord for your connection.
When using a commercially available cord, use a monaural (2P)
2 meters long, with no resistance.
Basic Functions
The CONTROL A1
functions will operate as long as the component you want to operate is turned on, even if all of the other connected components are not turned on.
xAutomatic function selection
When you connect a CONTROL A1
compatible Sony amplifier (or receiver) to other Sony components using monaural mini- plug cords, the function selector on the amplifier (or receiver) automatically switches to the correct input when you press the play button on one of the connected components.
Notes
•You must connect a CONTROL A1 compatible amplifier (receiver) using a monaural
•This function only works when the components are connected to the amplifier (or receiver) inputs according to the names on the function buttons. Certain receivers allow you to switch the names of the function buttons. In this case, refer to the operating instructions supplied with the receiver.
•When recording, do not play any components other than the recording source. It will cause the automatic function selection to operate.