Using the CUSTOMIZE menu to adjust the receiver
You can adjust various receiver settings using the CUSTOMIZE menu.
1 Press CUSTOMIZE.
The CUSTOMIZE button lights up and “<<<CUSTOMIZE>>>” appears in the display.
2 Press the cursor buttons ( or ) to select the parameter.
For details, see “CUSTOMIZE menu parameters” below.
3 Turn the jog dial to adjust the selected parameter.
4 Repeat steps 2 and 3 to adjust the other items.
CUSTOMIZE menu parameters
The initial setting is underlined.
xMENU EXPAND (Menu expanding)
• ON
The advanced parameters for the SET UP, SURROUND, LEVEL, and EQ menus are displayed and can be adjusted.
For details on each setup items, see pages 19,
• OFF
The advanced parameters are not displayed.
xdts 96/24DEC.
(DTS 96/24 decoding mode)
•AUTO
When a DTS 96/24 signal is input, it is played back at 96 kHz sampling frequencies.
•OFF
Even when a DTS 96/24 signal is input, it is played back at 48 kHz sampling frequencies.
Note
This parameter is valid only in the AUTO DECODING mode (page 34). In other sound fields, this parameter is always set to “OFF”.
x2CH MODE
(2 channel decoding mode)
You can use the NORMAL SURR (;PLII/NEO:6) button to set the 2 channel decoding mode (page 38). You can set this parameter only when NORMAL SURROUND or AUTO DECODING* is selected. In the Cinema Studio EX mode, this parameter is always set to “PRO LOGIC” and cannot be changed.
For details on each decoding mode, see page 38.
*The selected decoding mode is applied only when the Dolby Digital [Lt/Rt] signal is input.
•PRO LOGIC
•PLII MOVIE
•PLII MUSIC
•Neo: Cinema
•Neo: Music
xSB DECODING
(Surround back decoding mode)
You can use the CUSTOMIZE menu to set the surround back decoding mode (page 39).
For details on each decoding mode, see page 39.
•AUTO
•MATRIX
•OFF
xMULTI CH 1
(Multi channel 1 assignment)
xMULTI CH 2
(Multi channel 2 assignment)
Initial setting: NONE (no assignment)
Lets you assign the audio signal input to MULTI CHANNEL IN 1 (or 2) jacks to any function except TUNER and PHONO.
You cannot assign both “MULTI CH 1” and “MULTI CH 2” to the same function.
xD.POWER (Digital power management)
• AUTO OFF
Lets you turn off the power of the unnecessary digital circuits automatically when outputting the analog audio signals using the ANALOG DIRECT or MULTI CH DIRECT function. You can enjoy high quality analog audio without the influence of digital circuits.
• ALWAYS ON
Lets you keep the power of digital circuits on. Select if you do not like the time lag that occurs with the “AUTO OFF” setting when digital circuits are turned on, etc.
continued
Adjustments Advanced Settings and