You can set the receiver to turn off automatically at a specified time by using the remote.
For details, refer to the operating instructions supplied with the remote.
Select SLEEP from the RECEIVER menu repeatedly while the power is on.
Each time you select SLEEP, the display changes cyclically as follows:
2:00:00 t 1:30:00 t 1:00:00 t 0:30:00 t
OFF
While using Sleep Timer, “SLEEP” lights up in the display.
Models of area code TW, KR only
You can also use the SLEEP button on the receiver.
Tip
To check the remaining time before the receiver turns off, select or press SLEEP. The remaining time appears in the display.
Set the SPEAKERS switch according to the front speakers you want to drive.
Set to | To select |
AThe speakers connected to the FRONT SPEAKERS A terminals.
BThe speakers connected to the FRONT SPEAKERS B terminals.
A+B* | The speakers connected to both the |
| FRONT SPEAKERS A and B |
| terminals (parallel connection). |
| The sound field is automatically set to |
| 2CH STEREO. |
|
|
OFF | No speaker output. |
|
|
*Be sure to connect front speakers with a nominal impedance of 8 ohms or higher if you want to select
both sets of front speakers (A+B). In this case, set the IMPEDANCE SELECTOR to “4Ω”.