Specifications (continued)
EQ |
|
BASS: | 99 Hz~1.0 kHz |
MID (FRONT L/R, CENTER only): | |
| 198 Hz~10 kHz |
TREBLE: | 1.0 kHz~10 kHz |
Gain levels: | ±10 dB, 0.5 dB step |
FM tuner section |
|
Tuning range | 87.5 - 108.0 MHz |
Antenna terminals | 75 ohms, unbalanced |
Sensitivity |
|
Mono: | 18.3 dBf, 2.2 µV/75 ohms |
Stereo: | 38.3 dBf, 22.5 µV/75 ohms |
Usable sensitivity | 11.2 dBf, 1 µV/75 ohms |
S/N |
|
Mono: | 76 dB |
Stereo: | 70 dB |
Harmonic distortion at 1 kHz | |
Mono: | 0.3% |
Stereo: | 0.5% |
Separation | 45 dB at 1 kHz |
Frequency response | 30 Hz – 15 kHz, |
| |
Selectivity | 60 dB at 400 kHz |
AM tuner section |
|
Tuning range | 531 – 1,602 kHz |
Antenna | Loop antenna |
Usable sensitivity | 50 dB/m (at 999 kHz) |
S/N | 54 dB (at 50 mV/m) |
Harmonic distortion | 0.5 % (50 mV/m, |
| 400 Hz) |
Selectivity | 35 dB |
Video section
Inputs/Outputs |
|
Video: | 1 |
Y: 1 |
C: 0.286
COMPONENT VIDEO: Y: 1
General
Power requirements
Area code | Power requirements |
CEL | 230 V AC, 50/60 Hz |
|
|
TW | 110 V AC, 60 Hz |
|
|
KR | 220 V AC, 60 Hz |
| |
Power consumption | |
Area code | Power consumption |
|
|
CEL, KR | 390 W |
|
|
TW | 400 W (max. 1,000 W) |
|
|
Power consumption (during standby mode)
| 1 W |
AC outlets |
|
Area code | AC outlets |
|
|
CEL | 1 switched, 100 W |
|
|
TW | 2 switched, 100 W |
|
|
Dimensions | 430 ⋅ 174 ⋅ 465 mm |
| including projecting parts |
| and controls |
Mass (Approx.) | 21 kg |
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander
R6
For details on the area code of the component you are using, see page 2.
Design and specifications are subject to change without notice.