Sony SU-LW1 12

Arm

Tilt adjuster

Arm bases

Aand B

Adjust the tilt of the arms.

If you want to install the display vertically, flush with the wall (0°), skip 1 and 2 below. Check that the arms are securely attached to the Plate Unit.

	1	1Remove all four tilt adjusters.
	1	2Put them into the screw holes corresponding to the
		2Put them into the screw holes corresponding to the
		desired angle (5°, 10°, 15°, or 20°) and tighten them
		firmly.

Notes

• The angle of the left and right arms must be the same.

•Be careful not to catch your fingers when adjusting the angle of the arms.

	•	When using an electric screwdriver to tighten the
		screws, the torque must be approx. 2 N•m.
2	•	Check that the arm bases are securely attached to
2		the Plate Unit.
		the Plate Unit.

12 (GB)