1Remove the two screws from the Tabletop Stand.
Note
Do not lay the display down when carrying out the procedure.
2Holding down the base of the Stand, lift up the display slightly, then move it away from the Stand. The display will separate from the Stand. At least two persons must hold and carry the display.
Notes
•At least two persons must work together on this procedure.
•When lifting up the display, hold the base of the Stand so that it is not lifted along with the display.
3Remove the two hooks on the rear cover of the display.
Note
Lay the display face down on a soft cloth.
Lift up and carry forward.
2
1
Base of the Stand
3
Soft cloth
Note
Lay the display face down on a soft cloth before going to 1.
1Remove the four screws from the rear cover of the display.
2Pull the stand towards you. The Stand will separate from the display.
3Remove the four screws on the rear cover of the display.
Notes
• Lay the display face down on a stable
and level surface, leaving the base of
the Stand sticking out in the air.3 Putting the display face and the base
of the Stand on the same level surface makes the Display Unit inclined, thus unstable, causing any danger.
•When removing the Tabletop Stand, hold it firmly.
1
2
Soft cloth
15 (GB)