The procedure differs depending on the display model. Apply the procedure appropriate for the display you are installing.
1Pull the lower corner (either right or left ) of the rear cover. Then pull the other lower corner.
2Hold the rear cover with both hands and pull it towards you. The rear cover will separate from the display.
Note
Lay the display face down on a soft cloth before going to 3.
3Remove the two small screws from the clip. Detach the clip from the Tabletop Stand.
4Remove the five screws from the Tabletop Stand.
5Lift up the Stand slightly, then pull it towards you. The Stand will separate from the display.
Notes
•Lay the display face down on a stable and level surface, leaving the base of the Stand sticking out in the air.
Putting the display face and the base of the Stand on the same level surface makes the Display Unit inclined, thus unstable, causing any danger.
•When removing the Tabletop Stand, hold it firmly.
1 
2 
3
Clip
Soft cloth
Screws removed in 4
4
5
13 (GB)