If the following precautions are not observed, there is a possibility of injury or property damage.
Do not install the
Do not install the
Do not handle the product with excessive force during cleaning or maintenance.
Do not apply excessive force on the topside of the Display Unit.
If you do so, this may cause injury or property damage by causing the Display Unit to fall.
Do not install the Display Unit over or under an
If you do so, the Display Unit may be exposed to air currents from the
•If you use the Display Unit installed on the
•If you have routed 300 ohm feeder cables behind the wall, we recommend that you change them to 75 ohm coaxial cables.
If it is necessary to continue to use 300 ohm feeder cables, be sure to confirm that sufficient space is available between the Display Unit and the feeder cables behind the wall before starting the installation.
Consult your contractor on an appropriate installation location where the Display Unit suffers no radio noise before starting the installation.
5 (GB)