Be sure to install the Display Unit on a wall that is both perpendicular and flat.

If you fail to do so, the Display Unit may fall and cause injury.

After proper installation of the Display Unit, secure the cables properly.

If people or objects get tangled in the cables, this may result in injury.

Be careful not to hurt your hands or fingers during the installation.

Be careful not to hurt your hands or fingers when installing the Wall-Mount Bracket or the Display Unit.

The screws needed to secure the Wall-Mount Bracket to the wall are not supplied.

Use the appropriate screws for the wall material and structure when mounting the Wall-Mount Bracket.

Step 1: Check to see that you have all the items necessary for installation

1

2

Prepare five or more M6 or equivalent screws (not supplied) and a screwdriver. Select screws suitable for the material of the wall.

Unpack the carton and check to see that all the following items are included.

Screws (+B5 ⋅ L12) (2)

Screws (+PSW5 ⋅ L16) (4)

(For the KLV-26HG2)

Plate Unit (1)

Mounting Hook Unit (2)

7 (GB)