Step 6: Install the display on the Plate Unit

WARNING

Do not connect the power cord to a wall socket before the installation is completed. If the mains lead is pinched, a short circuit may occur, causing an electric shock.

Be careful not to stumble over the cables or the display.

1 KLV-26HG2

The supplied screws (+PSW5 ⋅ L16)

Mounting Hook Units

Soft cloth

Rear of the display

KDL-L32MRX1/KLV-L32MRX1/KLV-30MR1

The screws removed in Step 5

Mounting Hook Units

Soft cloth

Rear of the display

KLV-L32M1

The screws removed

in Step 5

Mounting Hook Units

Soft cloth

Rear of the display

16 (GB)

Align the holes on the Mounting Hook Units with the corresponding holes on the rear of the display. Secure them to the display using four screws.

For the KLV-26HG2, use the screws supplied (+PSW5

⋅L16). For the KDL-L32MRX1, the KLV-L32MRX1, the KLV-30MR1, and the KLV-L32M1 use the screws you removed in Step 5.

Notes

•Lay the display face down on a soft cloth.

•When using an electric screwdriver to tighten the screws, the torque must be approx. 2 N•m.