English

3 Install the Display Unit on the Plate Unit.

1 Insert the screws (+B6 ⋅ L20, supplied) for securing the Mounting Hook Unit into the screw holes on the outer left and right sides of the Mounting Hook Unit support shafts, and then tighten them temporarily.

2Hitch the upper hooks of the two Mounting Hook Units on

to the support shafts of the arms.

3Place the lower hooks of the two Mounting Hook Units so that they touch the front side of the Mounting Hook Unit

support shafts.

4Slightly push the Display Unit toward the Plate Unit and upward, to hitch the lower hooks of the two Mounting

Hook Units on to the Mounting Hook Unit support shafts.

5Confirm the eight hooks are firmly hooked on the four shafts on the Plate Unit.

6Firmly tighten the securing screws screwed in temporarily in Procedure 1.

Note

If the temporarily attached screws for securing the Mounting Hook Unit protrude inside the Mounting Hook Unit support shafts, the lower hooks of the Mounting Hook Units cannot be fitted in.

Franç ais

Installez l’écran sur la plaque.

1Insérez les vis (+B6 ⋅ L20, fournies) pour fixer le crochet de fixation dans les trous de vis sur les côtés extérieurs gauche et droit des arbres-support du crochet de fixation, puis

vissez-les temporairement.

2Fixez les crochets supérieurs des deux crochets de fixation

sur les arbres-support des bras.

3Placez les crochets inférieurs des deux crochets de fixation de façon à ce qu’ils touchent les arbres-support du crochet

de fixation.

4Poussez légèrement l’écran vers la plaque et vers le haut pour attacher les crochets inférieurs des deux crochets de

fixation sur les arbres-support du crochet de fixation.

5Vérifiez que les huit crochets sont solidement fixés sur les

quatre arbres de la plaque.

6Serrez solidement les vis vissées temporairement à l’étape 1.

Remarque

Si les vis serrées temporairement pour fixer le crochet de fixation

pénètrent à l’intérieur des arbres-support du crochet de fixation, les crochets inférieurs du crochet de fixation ne peuvent pas être fixés.

1

English

Tighten the screws to halfway so that they do not protrude from the opposite side.

Franç ais

Serrez les vis à moitié pour qu’elles ne dépassent pas de l’autre côté.

Españ ol

Apriete los tornillos hasta la mitad de manera que no sobresalgan por el lado opuesto.

2

4

3

Mounting Hook Unit/

Crochet de fixation/

Ganchos de montaje

6

34 (US, FR, ES)