1st image (shifted in the + direction)

2nd image (appropriate exposure for the camera)

3rd image (shifted in the

– direction)

Set the mode switch to .

Press MENU.

The menu appears.

Select [Mode] (REC Mode) with /, then select [Exp Brktg] with /.

Select [BRK] (Bracket Step) with /, then select the desired exposure adjustment value with /.

±1.0EV: Shifts the exposure value by plus or minus 1.0EV.

±0.7EV: Shifts the exposure value by plus or minus 0.7EV.

±0.3EV: Shifts the exposure value by plus or minus 0.3EV.

Shoot the image.

To return to normal mode

Select [Normal] in step .

•You cannot use the flash in this mode.

•The focus and white balance are adjusted for the first image, and these settings are also used for the other images.

•When the exposure is manually adjusted (page 60), the exposure is shifted based on the adjusted brightness.

•The recording interval is approximately 0.36 second.

•If the subject is too bright or too dark, you may be unable to shoot properly with the selected bracket adjustment value.

•You may not be able to shoot images in Exposure Bracket mode depending on the Scene Selection mode (page 43).

64