Sony T33, DSC-T3, DSCT33 Direct printing, Preparing the camera, Select [PictBridge] with /, then press , Select 2 (Setup 2) with , then select [USB Connect] with //

Direct printing

Even if you do not have a computer, you can easily print images shot using your camera by connecting the camera to a PictBridge compliant printer. For preparation, you only set the USB connection on the Setup screen and connect the camera mounted in the Cyber- shot Station to the printer with the USB cable.

Using a PictBridge compliant printer easily prints the index print*.

*An index print function may not be provided depending on a printer.

•Using the AC Adaptor is recommended to prevent the power from turning off partway through printing.

•You cannot print movies.

•When an error notification is received from

the connected printer, the indicator flashes for approximately five seconds. Check the connected printer.

Single print

Index print

•If you arrange the same image side by side, select [This image] in single-image mode, then set [Index] to [On] (page 79).

•The number of images printed on a single index print differs according to the printer.

Preparing the camera

Set the USB mode on the camera to connect the camera with a printer.

Before operation

Set the menu to the Setup screen (pages 54 and 124).

Control button	Mode switch
MENU

Select 2 (Setup 2) with , then select [USB Connect] with //.Select [PictBridge] with /, then press .

Setup 2

1 File Number: PictBridge

2USB Connect: PTP NormalVideo Out:

1Clock Set:

2

The USB mode is set.

printing image Still

77