Sony UP-D77MD 16

Operation

1In menu mode, display “SAVE /USER X/” by pressing the F or f button.

2Display the desired user set number by pressing the G or g button.

Keep pressing the G or g button until the desired user number is displayed.

3Press the EXEC button.

All values adjusted in “Adjusting Gray” on page 13 and here, “Adjusting the Color,” are

registered in the user set number selected in step 2.

The printer operates according to this registered value set unless you load another user set. Also, if you modify the settings, the modified values remain effective until another user set is loaded, even if you turn off the power.

11 Press the MENU button to exit menu mode for adjusting gray and color.

The printer returns to standby status and “READY” appears in the printer window display.

16 Adjusting Printouts

Contents

Page Owner's Record WARNING For the customers in the U.S.A For the customers in Canada For the customers in the U.S.A and Canada Warning on power connection Warning on power connection for medical use For Customers in Taiwan only Introduction Operation Miscellaneous Introduction Front Rear Note on using the UP-D77MD How to attach the ferrite cores Loading an Ink Ribbon Cassette Loading the Paper Page Starting to Print Making Printouts with the Desired Color Adjusting Gray Adjusting the Color When you are not satisfied with the results Page Safety Installation On condensation On Transportation Cleaning Cleaning the thermal head Cleaning of the thermal head Repeat the inserting pulling-out of the holder about three times SOP and Meta SOP Classes Error Messages If the Paper Jams Page Page Setup Page To confirm the IP address Opening the Setup Window Components of Pages Summary/Print Job Page DICOM Settings Page Printer Status Page E-MailSettings Page Page When the image data is not sent When setting up an E-mail