Setup

Setup of the Unit

Perform the following settings when the unit is used for the first time after being purchased, or when the IP address assigned to the UP-D77MD is changed.

1 Open the DICOM Settings page.

For detailed information on how to open the page, see “Opening the Setup Window” (on page 27).

2 Perform the required settings related to TCP/IP.

IP Address text box

Sub-net Mask text box

Default Gateway text box

1Enter the IP address of the UP-D77MD on the network in the IP Address text box.

2Enter the sub-net mask in the Sub-net Mask text

box.

3Enter the IP address of the default gateway if a gateway is used on the network.

3 Enter the DICOM AE title in the AE Title text box. Up to 16 characters can be entered.

DICOM AE text box

Setup of E-Mail

The E-Mail settings page allows you to set up E-mail service so that an e-mail message will be sent automatically when an error occurs in the UP-D77MD.

1 Open the E-Mail settings page.

For detailed information on how to open the page, see “Opening the Setup Window” (on page 27).

2 Set criteria determining when an e-mail message should be sent.

Motor/sensor error check box

Film/Paper Jamming check box

More than 30,000 printed with the current thermal head check box

Place the check marks on the check box corresponding to an error that requires notification via an e-mail message.

Error item

Content

Motor/Sensor error

When an error occurs in the motor/

 

sensor system.

 

 

Film/Paper

When a paper has jammed.

Jamming

 

 

 

More than 30,000

When the total number of prints

printed with the

with the current thermal head

current thermal

exceeds 30,000.

head

 

 

 

4 Click the [Save settings] button. The settings are saved.

30 Setup of the Unit / Setup of E-Mail