A B

 

 

C

RF

 

AF

 

 

BATT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH

D

The D channel indication for

U66 model is shown.

ARF (radio frequency) indications The number of dots indicates the RF input level.

BAF (audio frequency) indication Appears whenever the output audio signal is stronger than the reference level.

CBATT (battery) indication Shows the battery condition.

For details, see “Power Supply” on page 29.

DCH (channel) indication Shows the reception channel. Each time you press the SET button, the channel indication changes as follows. For details, see “Settings” on page 37.

Reception channel

 

Press

Reception

the

frequency

SET

 

button.

Accumulated

 

battery use

 

time

 

The channel/frequency indications for U66 model are shown.

5+ (+ selection) / – (– selection/ reset) buttons

Press these buttons to set the reception channel and frequency. The “–” button resets the accumulated battery use time to “00:00”. These buttons can also be used to adjust the monitor level.

6Battery compartment Accommodates two LR6 (size AA) alkaline batteries.

For details on how to insert the batteries, see “Power Supply” on page 29.

7SET button

Press to change display parameters. For details, see “Settings” on page 37.

8POWER switch

Turns the power of the tuner ON or OFF.

9OUTPUT (audio output) connector (3.5-mm diameter stereo mini jack)

Connect one end of the supplied XLR- BMP conversion cable here and the other end to the microphone input on a camcorder, mixer, or amplifier. If the microphone input connector on the device connected to the tuner is a stereo mini jack, use an optional mini plug ystereo mini plug conversion cable (RK-G139, etc.) and connect the mini plug to the tuner and stereo mini plug to the microphone input connector on the device.

25