Sony UPW-C1/C2 (URX-M1), 8SET button, 1SET button, 3Display section, Diversity tuner module, RF (radio frequency) indicator, RF (radio frequency) indicator

Reception

channel	Press
	the
	SET
Reception	button.
frequency

The channel/frequency indications for U66 model are shown.

7RF (radio frequency) indicator The color indicates the strength of the RF input signal.

On in green: RF input is 25 dBµ* or more.

Off: RF input is less than 25 dBµ*.

8SET button

Press to change display parameters. For details, see “Settings” on page 37.

9TUNER OUTPUT (audio output) connector (XLR type) Connect to the audio input connector of a mixer or amplifier, etc.

0LEVEL (audio output level) switch

Sets the output level of the TUNER OUTPUT connector to –28 dBm or –58 dBm.

Select the setting according to the input level of the equipment connected to the tuner.

qa TRS PHONE (tuner audio output) connector (1/4-inch jack)

Connect to the audio input connector of a mixer or amplifier, etc. The output level from this connector is –30 dBm.

qs DC IN 9V (DC power input) connector

Connect the supplied AC adapter here.

Diversity tuner module(URX-M1)1SET button

Press to change display parameters. For details, see “Settings” on page 37.

2RF (radio frequency) indicator The color indicates the strength of the RF input signal.

On in green: RF input is 25 dBµ* or more.

Off: RF input is less than 25 dBµ*.

3Display section

A B

RFAF

CH

C

The C channel indication for

U66 model is shown.

......................................................................................................................................................................

* 0 dBµ = 1 µVEMF

27