Manuals / Brands / Musical Instruments & Equipment / Microphone / Sony / Musical Instruments & Equipment / Microphone

Sony UPW-C1/C2 Specifications, Items common to all transmitters, Body-packtransmitter (UTX-B1), H1), Transmitters (UTX-B1

1 52

Download 52 pages, 773.86 Kb

Specifications

Transmitters (UTX-B1/

H1)

Items common to all transmitters

Oscillator type Crystal-controlled PLL

synthesizer

Carrier frequencies

Model available in USA: 758 to 806 MHz

Model available in Europe: 798 to 862 MHz

Model available in Australia: 792 to 806 MHz

Operating frequency band Model available in USA

and Europe: 24 MHz BW Model available in

Australia: 14 MHz BW RF output level

30 mW/5 mW selectable Pre-emphasis

50µs

Reference deviation ±5 kHz

Frequency response

50Hz to 18 kHz

Distortion

1.0% or less

Signal-to-noise ratio

60dB or more

Tone signal

32kHz

Attenuation

0to 21 dB, in 3-dB steps

Display Channel, frequency, audio level, RF level, accumulated battery use time

Indicator Power on

Power requirements

3.0V DC (two LR6/AA- size alkaline batteries)

Battery life

Approx. 6 hours

Body-pack transmitter (UTX-B1)

Antenna 1/4λ wave length wire Audio input connector

3.5-mm dia. mini jack Audio input level

–60 dBV to –39 dBV Dimensions

	63 ⋅ 100 ⋅ 27 mm (2 1/2 ⋅ 4
	⋅ 1 1/8 inches) (w/h/d)
	(excluding the antennas)
Mass	Approx. 140 g (5 oz)
	including batteries

49

Contents

UWP-C1/C2 UWP-S1/S2 UWP-X1/X2 For UTX-B1and UTX-H1Transmitters Notice for customers in Europe Notification aux clients européens Hinweis für die Kunden in Europa Avvertenza per gli utilizzatori in Europa Aviso para los clientes de Europa Nota para utilizadores da Europa Remarque: Hinweis: Nota: Obs.: Opmerking: Observera: Bemærk: Huom Note for customers in Switzerland: Luxembourg: Remarque pour les clients au Luxembourg: Hinweis für Kunden in Luxemburg: Note for customers in Italy: For URX-P1, URX-M1,and URX-R1Tuners Page Page Table Contents Configuration of the Packages Configuration of the Packages UWP-C2 Hand-heldmicrophone (UTX-H1)(1) UWP-S1 Half-racksize diversity tuner (URX-R1)(1) UWP-S2 UWP-X1 Diversity tuner module (URX-M1)(1) UWP-X2 Features UWP-C1 UWP-C2 UWP-S1 UWP-S2 UWP-X1 UWP-X2 Using the CD-ROMManual Using the CD-ROMManual Precautions Parts Identification 5+ (+ selection) / – (– selection/ reset) buttons 6Battery compartment Accommodates two LR6 (size AA) alkaline batteries 7SET button 8POWER switch Hand-heldmicrophone Parts Identification 6SET button Portable diversity tuner (URX-P1) 1Antennas a/b RF (radio frequency) indications CBATT (battery) indication Shows the battery condition 9OUTPUT (audio output) connector (3.5-mmdiameter stereo mini jack) Half-racksize diversity tuner (URX-R1) 1POWER switch 2Antennas a/b 3MONITOR connector (phone jack) 8SET button TUNER OUTPUT (audio output) connector (XLR type) 0LEVEL (audio output level) switch qa TRS PHONE (tuner audio output) connector (1/4-inchjack) qs DC IN 9V (DC power input) connector 4+ (+ selection) / – (– selection/ reset) buttons Power Supply Body-packtransmitter (UTX- B1)/portable diversity tuner (URX-P1) Battery indication Notes on batteries Attachment and Installation Procedures Attaching the microphone Attaching the holder clip to the microphone Attaching the wind screen to the microphone Attaching the microphone holder Connecting the XLR-BMPconversion cable to the OUTPUT connector Attaching the shoe mount adapter Attaching the microphone stand adapter Installing a diversity tuner module (URX-M1)into an MB- 806A Tuner Base Unit Installing a diversity tuner module (URX-M1)into an SRP-X700PPowered Mixer Settings Settings Setting the reception channel The procedure below is the same for all UWP series tuners (URX-P1/R1/M1) Setting the attenuation level of the audio input Do the following while there is no signal transmission Do the following while there is signal transmission Resetting the accumulated battery use time indication For transmitters (UTX-B1/H1) 1-b For the portable diversity tuner (URX-P1) 4-b For the portable diversity tuner (URX-P1) Setting the RF output level Setting the monitor level (portable diversity tuner (URX-P1)only) Operation If noise is heard System Configurations System Configurations Sample configurations for AV presentations Sample configuration of a PA system Error Messages Troubleshooting Troubleshooting Specifications Items common to all transmitters Body-packtransmitter (UTX-B1) Items common to all tuners Portable diversity tuner (URX-P1) Half-racksize diversity tuner (URX-R1) Diversity tuner module (URX-M1)