2 Raise the cartridge release lever.
Cartridge release lever
The cartridge is released, allowing you to pull it out.
3 Insert a new print cartridge, and close the cover.
4 Press the EXEC button.
Notes
•Never put your hand into the cartridge slot as the inside can reach high temperatures.
•Do not rewind the ink ribbon and use the rewound print cartridge for printing. Doing so may produce incorrect printing results or damage the printer.
•If the print cartridge does not insert properly, remove it once before reinserting it. If the ink ribbon is too slack to be loaded, remove the slack by winding the ink ribbon in the direction of the arrow while pressing the spool. This is the only time the ink ribbon should be wound.
•When you turn on the printer with no print cartridge
loaded, the 
lamp lights.
•Do not touch the ink ribbon or place the print cartridge in a dusty location. Fingerprints or dust on the ink ribbon may lower the print quality.
•Do not remove or insert print cartridges while printing is in progress.
Notes on storage
•Avoid storage in locations subject to high temperatures and humidity, excessive dust, or direct sunlight.
•When removing a partially used print cartridge for storage, store it in its original packaging.
To load the print paper1 Load the print paper into the paper tray.
Print paper
Riffle through the print paper before loading it with the printing surface (the side without imprinting) facing up. Make sure that the arrow on the paper is pointing in the same direction as the arrow on the tray. You can load up to 25 sheets when using the
2 Remove the protective sheet on the print paper.
Note
Be sure to keep the protective sheet as it is used when cleaning the inside of the printer.
18 Preparations