Sony UPX-C100 Dimensions for FRAME-[6]prints, To adjust the width of the guidelines (FRAME-[6])

Print size						Default values
												F
Size No.	(a) mm	(b) mm			(c) mm			(d) mm	(e) mm
	(inches)	(inches)			(inches)			(inches)	(inches)
9	50	48.5			2.5			40.5	33.0			0.29
	(2)	(115/16)			(1/8)			(15/8)	(15/16)
10, 19 (D3)	47	37			5.0			33.0	27.0			0.23
	(17/ )	(11/	2	)	(7/	32	)	(15/ )	(11/	8	)
	8							16
11,	45	35			4.0			33.0	27.0			0.23
20 (D2)	(113/16)	(17/16)			(3/16)			(15/16)	(11/8)
12	45	45						*				0.29
	(113/16)	(113/16)
13	43	33			6.0			28.0	23.0			0.20
	(13/4)	(15/16)			(1/4)			(11/8)	(29/32)
14	38	32			3.5			28.0	23.0			0.20
	(11/2)	(15/16)			(5/32)			(11/8)	(29/32)
15	34	28			3.0			25.5	20.5			0.18
	(13/8)	(11/8)			(1/8)			(11/16)	(13/16)
16	23	23			0.0			20.5	16.5			0.15
	(29/32)	(29/32)			(0)			(13/16)	(21/32)

*Do not use this frame and print layout combination, as the subject’s face will not fit within the print.

To adjust the width of the guidelines (FRAME-[6])

1 Display the SETUP screen.

For details on displaying the SETUP screen, see “Displaying the SETUP Screen” on page 30.

2 Select FRAME by pressing the v or V control button.

3 Press the ENTER button.

The frame selection screen appears.

4 Select FRAME-[6] by pressing the v or V control button.

The guidelines for FRAME-[6] appear on the LCD.

5 Adjust the width of the guidelines.

1)Select WIDTH by pressing the B control button.

2)Adjust the width of the guidelines by pressing the v or V control button.

3)Press the ENTER button.

6 Press the ENTER button. The SETUP screen reappears.

Dimensions for FRAME-[6] prints

The default value for WIDTH is 128. You can calculate the approximate value of (g) for each print size by multiplying the WIDTH value by the values in column G of the following table.

(g) = WIDTH × G

For example, when 10 is selected for the size number with WIDTH at 128, the dimension is as follows:

(g) = 128 × 0.16 = 20.48 mm (13/16")

Note

The values in column G are rounded, so calculation results will not be exact. Use the calculation results as a reference, and confirm the actual dimensions after printing.

(g) = WIDTH × G

Tolerance: ±3%

	Print size			Default
				values	G
Size No.		(a) mm	(b) mm	(g) mm
		(inches)	(inches)	(inches)
1 (X46)		151	101.6	59.0	0.46
		(6)	(4)	(23/8)
1 (X45)		120	97.5	50.0	0.39
		(43/4)	(37/8)	(2)
2		120	90	48.0	0.38
		(43/4)	(35/8)	(115/16)
3		95	70	36.5	0.29
		(33/4)	(27/8)	(17/16)
4, 17 (D2)		80	60	31.0	0.24
		(31/4)	(23/8)	(11/4)
5		70	53	28.0	0.22
		(27/8)	(21/8)	(11/8)
6		70	50	28.0	0.22
		(27/8)	(2)	(11/8)

Menus 49