Displaying the SETUP Screen

The SETUP screen can be displayed regardless of

whether the mode dial is set to – or .

3

2

1

1 Press the MENU/GO BACK button. The MENU screen appears.

2 Select SETUP by pressing the v or V control button.

3 Press the ENTER button. The SETUP screen appears.

To exit the menu and return to the previous screen

Press the MENU/GO BACK button.

Storing Custom Settings for Each MENU in Capture Mode

On this camera, each of the mode dial positions – stores a custom setting for the Capture mode MENU.

The custom settings are stored under any of the five

– marks on the mode dial. Because the custom settings remain in memory even if the camera is turned off, they can always be recalled later when shooting.

1

1 Before customizing the settings in the MENU,

select one of the five locations – on the mode dial to store the custom setting.

2 Customize the settings.

3 Exit the MENU screen and return to the Capture mode display. Then, press the ENTER button.

Your customized settings are stored in the location you selected. Setting values are saved when you press the ENTER button.

To recall stored custom settings

Set the mode dial to the –mark for the location where the custom settings are stored.

Note

If you cut off the power supply without pressing the 1 button, such as by removing the batteries during use or by disconnecting the AC power adaptor, your custom settings may not be stored properly.

30 Settings