To clean the inside of the printer

If white lines or dots appear on printed pictures, clean the inside of the printer using the supplied cleaning cassette and the protective sheet included with the printing pack.

Notes

•Only perform cleaning if there are white lines or dots on the printed pictures.

•When the printer is printing pictures normally, cleaning will not improve print quality.

1 Remove the paper tray from the printer, and then remove the paper from the tray.

2 Place the protective sheet in the tray so that the unprinted side is facing up and the arrows on the bottom of the tray and back of the sheet are pointing in the same direction.

3

4

Open the print cartridge cover and remove the print cartridge.

Insert the supplied cleaning cassette and close the cover.

5 Press the EXEC button.

A buzzer sounds and “HEAD CLEANING/PUSH [EXEC]” appears.

6 Press the EXEC button again.

The cleaning cassette and protective sheet clean the inside of the printer. After cleaning is finished, the protective sheet is automatically ejected.

7 Remove the cleaning cassette from the printer, and reinsert the print cartridge and paper tray.

To replace the printer connection cable

The camera grip must be removed from the camera before the printer connection cable can be disconnected from the camera.

1 Open the cap on the camera grip, loosen the screw on the bottom by turning it counterclockwise, and then remove the grip.

2 Replace the printer connection cable.

Troubleshooting 71