2 Press the / button.

The layout preview screen appears.

Color/Black & white selection

Print size selection

If you press the / button immediately after connecting the camera to the printer or turning the power on, the message “CHECK PRINTER” or “CHECK CONNECTION” may appear on the camera’s LCD.

When this happens, press the MENU/GO BACK button to clear the display, and then press the/ button again.

3 Select the print size using the b and B buttons. Press the b or B button repeatedly until the desired size appears.

For details on the selected print size and picture dimensions, see “Setting the Frame (FRAME)” on page 45.

4 Select whether to print in color or black & white by pressing the V button.

COLOR: Prints the picture in color.

B/W: Prints the picture in black & white.

5 Press the/ button again.

The image data is sent from the camera to the printer.

Note

Once the data transfer begins, it cannot be canceled.

When printing begins, “Printing in progress!” appears on the camera’s LCD. Close this message by pressing the MENU/GO BACK button or a control button.

When the mode dial is set to – , the LCD returns to the auto-review display. Once printing ends, you can print the same picture again at a different size, color, etc. You can also take another picture during printing. To take the next picture, press the release button halfway or press the zoom lever to turn off the auto-review display.

When the mode dial is set to , the LCD returns to the playback image.

To print multiple pictures on a single sheet of paper

By selecting print layout 17, 18, 19, or 20, you can print two or three different pictures on a single sheet of paper. Two pictures are printed with print layout 17, 18, or 20, and three pictures are printed with print layout 19. When the UPC-X34 series is used, only print layout 20 can be selected.

In Capture mode, the last two captured pictures (or the last three pictures, with print layout 19) are printed. In Playback mode, the currently selected picture and the previous picture (or the previous two pictures, with print layout 19) are printed.

Printout for print size 19

The last picture taken or the picture currently selected

To adjust the print quality

On the printer, you can independently adjust the print quality for color pictures and black & white pictures and store the adjusted values. Once these values are stored, the printer automatically selects the appropriate adjusted value for color prints and black & white prints, respectively.

For details on adjusting the print quality, see “Adjusting the Picture Quality (COLOR ADJUST)” on page 56.

To adjust black & white print quality

When you print a picture in black & white by selecting B/W, the picture is printed by overlaying yellow, magenta, and cyan, and therefore may not be perfectly achromatic. To adjust the black tone, you can use the print quality adjustment function on the printer.

Operations (Shooting and Printing)

23