Displaying the Firmware Version ( VERSION)

You can display the camera’s firmware version. Use this information when consulting a service representative about the camera.

3,4

2

1 Display the SETUP screen.

For details on displaying the SETUP screen, see “Displaying the SETUP Screen” on page 30.

2 SelectVERSION by pressing the v or V control button.

3 Press the ENTER button.

The VERSION screen appears.

4 Press the ENTER button.

The Capture or Playback mode screen reappears.

Locking the Camera Menus

You can keep menu screens from displaying even when the MENU/GO BACK button is pressed during Capture or Playback mode. This can prevent accidental changes to menu settings.

To lock the menus

Press the MENU/GO BACK button for at least five seconds. The menu screen disappears, and the lock icon appears. This icon indicates that the menus are now locked and pressing the MENU/GO BACK button will not display the menu screen.

The menus remain locked even when you switch between Capture and Playback modes or turn the power off.

To release the menu lock

Press the MENU/GO BACK button for at least five seconds. The lock icon disappears, and the menu screen appears.

Menus 55