Upgrading Your VAIO Computer
9Remove the six screws from the drive holder and take out the hard disk drive.
10Place a new hard disk drive into the drive holder and align the holes on each side of the holder.
11Secure the drive to the drive holder with screws, through the holes on each side of the holder.
!
A new hard disk drive comes with the necessary screws. Do not overtighten these screws when securing the drive to the drive holder.
12Slide the drive holder with the new drive into the hard disk bay until it clicks into place and connect the Serial ATA power cable and the Serial ATA cable to the new drive.
13Secure the drive holder with the screws that you removed in step 7.
14Replace the hard disk bay cover.