Upgrading Your VAIO Computer
10Place a new hard disk drive into the drive holder and align the holes on each side of the holder.
11Secure the drive to the drive holder with screws, through the holes on each side of the holder.
!
A new hard disk drive comes with the necessary screws. Do not overtighten these screws when securing the drive to the drive holder.
12Connect the Serial ATA power cable and the Serial ATA cable to the new drive.
13Insert the four tabs (5) underneath the hard disk bay frame and place the drive holder with the new drive into the bay.
14Secure the drive holder with the screws that you removed in step 6.
15Replace the hard disk bay cover.
16Connect the power cord and the peripheral devices to the back of the computer.
17Replace the back panel cover.
See Removing and Replacing the Back Panel Cover (page 22) for the procedure.