n 29 N

Getting Started

Connecting the Wireless Keyboard

A wireless keyboard and four AA alkaline batteries for use in the keyboard are supplied with your computer. Before attempting to use the wireless keyboard, you must install the batteries and establish communication between the computer and the keyboard.

✍

If you find your keyboard not working, for example after replacing the keyboard batteries, try the following steps for reconnection.

To connect the wireless keyboard

!

To connect the wireless keyboard, it must be located within a range of 30 cm to 1 m from the computer.

1Insert the supplied four AA batteries (1) into the battery compartment (2) on the bottom of the wireless keyboard.

2Turn on the computer.

3Slide the power switch (3) on the back of the keyboard to the ON position.

4Press the CONNECT button (4) on the right of the computer.

5Press the CONNECT button (5) on the bottom of the keyboard.

The connect indicator turns on in the LCD window on the keyboard when connection is established between the computer and the keyboard. If not, repeat the procedure.

!

Steps 4 and 5 must be completed within 10 seconds of each other.

If the wireless keyboard is left unused for 20 minutes or longer, the connect indicator will turn off to conserve battery power. This indicates that the connection between your computer and the keyboard is lost. Press the Fn key to check that the connect indicator turns on before using the keyboard.