Loading & Unloading Discs
Loading the VGP-XL1B Changer/Recorder
Before you load discs into the
1Make sure the Changer/Recorder is properly connected to the host computer and is turned on.
2Make sure the system is connected to the Internet and the Internet connection is working properly.
3Start Media Center Setup and verify that the correct options were selected during setup. From the main menu, select Tasks
Settings General Windows Media Center Setup Run Setup Again.
4Select Yes when asked, “Do you want Media Center to automatically connect to the Internet to get this information?”
5Select Yes when asked, “Do you have an always on Internet connection?”, if this is so.
Once you have completed this procedure, continue with loading discs into the Changer/Recorder.
Note: When loading discs, make sure that the label is facing to the right of the slot.
To load a single disc
•Press the Load button once and insert the disc in the open slot of the optical drive located on the front panel.
To load multiple discs
•Press the Load button twice and insert each disc in the open slot of the optical drive one at a time. The Changer/Recorder carousal keeps rotating open slots to the drive until all slots are filled or until no disc is inserted after 15 seconds.
23 |