Installing VGP-XL1B

The installation process consists of the following steps.

Step 1 Review the section titled Before You Begin.

Step 2 Install the Changer Software CD on the host computer.

Step 3 Connect the VGP-XL1B to the host computer.

Step 1: Before You Begin

Before connecting your VGP-XL1B CD/DVD Changer/Recorder to the host computer, consider the environment in which it will be placed. Listed below are some general guidelines.

•Do not set up the VGP-XL1B in the following locations:

-in direct sunlight

-near a magnet or a item that generates a magnetic field

-areas with high heat, such as near a heater

-areas with excessive heat, dust, and humidity

-areas with poor ventilation

Please observe the following items to avoid damage.

•Always turn off the power before the Changer/Recorder is moved. Damage may be caused to the changer if the device is transferred or moved with the power on.

•Do not move the Changer/Recorder if there are discs inside the carousel. Remove all discs from the changer before moving.

•Do not tip or hit this device. Even a slight vibration or small impact may cause a disc to come loose or cause damage to the discs or carousel.

•Do not set up where it is not physically secure.

•Do not obstruct the ventilation holes or place heavy objects on top of the device.

•If the host computer and the Changer/Recorder are placed in an enclosed cabinet, make sure there is sufficient airflow.

10

VGP-XL1B User Guide