Step 3: Connect the VGP-XL1B to the Host Computer
Note: Before you begin, make sure that the power has been turned off to the host computer and any peripheral equipment.
Connecting the
1Using the supplied i.LINK® cable, connect the end without the ferrite bead (a large node close to one end of the cable) to an i.LINK® connector on the host computer, and connect the cable end with the ferrite bead to an i.LINK® connector on the back panel of the
2Turn the power to the host computer on before turning the power on the
To verify that the installation was successful, do one of the following.
To verify using Device Manager
1Click the Start icon from the Window taskbar, and then click Control Panel.
2Click Hardware and Sound, then click Device Manager. The User Account Control popup appears. Click Continue.
3
To verify using Media Center
1Start Media Center.
2From the top level menu, look for the My Changer option.
17 |