Sony VPL-AW10, VPL-AW15 into a wall outlet, 1 After connecting the AC cord to the equipment, plug the AC cord

Step 3: Adjusting the Picture Position

Project an image on the screen and then adjust the picture position.

1 ?/1 (On/standby) indicator

6, 7 Zoom lever, Focus ring

5 LENS SHIFT dials (VPL-AW15 only)

Remote control detector

2

4

Tip

The ?/1 (On/standby), INPUT, MENU, and v/V/b/B/ (joystick) buttons on the top panel of the projector function the same as those on the remote control.

Note

Depending on the installation location of the projector, you may not control it with the remote control. In this case, point the remote control to the screen instead of the projector.

1 After connecting the AC cord to the equipment, plug the AC cord

Lights in red.	into a wall outlet.
	The ?/1 (On/standby) indicator lights
	in red and the projector goes into
	standby mode.

Preparations and Connections

21