Symptom

Cause and Remedy

The picture is too dark. c Adjust the contrast or brightness of the Picture menu

properly. (1 page 41)

The picture is not clear. c Adjust the focus using the focus ring. (1 page 24)

cCondensation has accumulated on the lens. Leave the projector for about 2 hours with the power on.

The picture flickers. c Activate “APA”, then adjust the current input signal.

cAdjust “Phase” for “Adjust Signal” in the Screen menu properly. (1 page 45)

On-screen display

Symptom

Cause and Remedy

 

On-screen display does not

c Set “Status” in the Setup

menu to “On.” (1 page 46)

appear.

c Check if the ?/1 (On/standby) indicator should light in green.

The model name does not c The display mode of the projector may be set at the time of

disappear from the screen. purchase. Consult with your local dealer or qualified Sony personnel.

Remote control

Symptom

Cause and Remedy

 

 

The remote control does

c Batteries could be weak. Replace them with new batteries.

not work.

(1 page 11)

 

c Insert the batteries with the correct polarities. (1 page 11)

 

c If there is a fluorescent lamp near the remote control detector, the

 

projector may work improperly or inadvertently.

 

 

Others

Symptom

Cause and Remedy

 

The fan is noisy.

c Check the setting of “Cooling Setting” in the Setup

menu.

 

(1 page 46)

 

cMake sure that the room temperature is not too high.

The number of fan rotation increases to maintain the product reliability of the projector’s components in a room, where the temperature is higher than normal. The fan noise becomes slightly louder. The approximate normal temperature is 25°C.

52