Installation Menu

The Installation menu is used for changing the installation settings.

V Keystone

Corrects the vertical trapezoidal distortion of the picture.

 

 

When the bottom of the trapezoid is longer than the top (

):

 

Sets a lower value (– direction)

 

 

When the top of the trapezoid is longer than the bottom (

):

 

Sets a higher value (+ direction).

 

 

 

 

 

 

 

 

 

Note

 

 

Depending on the picture position adjusted with the lens shift

 

 

feature, the aspect ratio of the picture may change from the original

 

or picture distortion may occur with V Keystone adjustment.

 

 

 

 

 

 

 

 

Image Flip

Flips the picture on the screen horizontally and/or vertically.

 

 

HV: Flips the picture horizontally and vertically.

 

 

H: Flips the picture horizontally.

 

 

V: Flips the picture vertically.

 

 

Off: The picture does not flip.

 

 

Use this item for installation for the backside projection or ceiling

 

 

installation.

 

 

 

 

 

 

 

 

Blanking (VPL-AW15 only)

This feature allows you to adjust the display area.

 

 

Select each screen edge “left / right / up / bottom” on the Blanking

 

adjustment screen with M / m. Adjust the desired Blanking value

 

 

with < / ,.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

When both the Blanking and the V Keystone are adjusted at the same time, the Blanking cannot be adjusted correctly. When using the Blanking, make sure that you set the V Keystone to “0”.

Menus the Using

49