5Lens protector (lens cover)

The lens protector automatically opens when the power is turned on.

6Front remote control detector7Ventilation holes (exhaust)8Connector/Control panel

For details, see “Connector Panel” and “Control Panel” on page 12.

9Rear remote control detector0Ventilation holes (intake)qa Lamp coverqs Powered tilt adjuster qd Speakerqf Security lock

Connects to an optional security cable (Kensington’s).

Web page address: http://www.kensington.com/

qg Focus ring

Adjusts the picture focus.

qh Zoom ring

Adjusts the picture size.

qj Ventilation holes (intake)/air filter coverNotes

•Do not place anything near the ventilation holes as it may cause internal heat build-up.

•Do not place your hand or objects near the ventilation holes as it may cause the air coming out heat build- up.

•To maintain optimal performance, clean the air filter every 300 hours.

For details, see “Cleaning the Air Filter” on page 37.

How to use the powered tilt adjusterTo adjust the height

Adjust the height of the projector as follows:

1

Press the I / 1 key

Overview

 

The lens protector opens, and the powered tilt adjuster rises automatically. The adjuster stops at its previously adjusted position.

Powered tilt adjuster

2 Press f or F of the TILT key to adjust the tilt of the projector.

You may press the KEYSTONE key on the Remote Commander to display the Tilt menu and adjust the tilt using the M/ m/</, keys.

to lower the

to raise the

projector

projector

TILT

TILT adjustment key

Notes

•Be careful not to let the projector down on your fingers.

•Do not push hard on the top of the projector with the powered tilt adjuster out.

It may be occurred malfunction.

Location and Function of Controls 11 GB