Sony VPL-CS5 1 Press the I / 1 key, 2 Press the I / 1 key again, To maintain optimal performance, For details, see “Cleaning the Air Filter” on page, On air filter

To turn off the power1 Press the I / 1 key.

“POWER OFF? Please press I / 1 key again.” appears to confirm that you want to turn off the power.

Note

A message disappears if you press any key except the I / 1 key, or if you do not press any key for five seconds.

2 Press the I / 1 key again.

The powered tilt adjuster is put away in the projector and the lens protector closes. The ON/STANDBY indicator flashes in green and the fan continues to run for about 90 seconds to reduce the internal heat. Also, the ON/STANDBY indicator flashes quickly for the first 60 seconds. During this time, you will not be able to light up again the ON/STANDBY indicator with the I / 1 key.

3 Unplug the AC power cord from the wall outlet after the fan stops running and the ON/STANDBY indicator lights in red.

When you cannot confirm the on-screen message

When you cannot confirm the on-screen message in a certain condition, you can turn off the power by holding the I / 1 key for about two seconds.

Note

Do not unplug the AC power cord while the fan is still running; otherwise, the fan

will stop even though the internal heat is still high, which could result in a breakdown of the projector.

On air filterTo maintain optimal performance, clean the air filter every 300 hours.For details, see “Cleaning the Air Filter” on page 37.

GB 26 Projecting