The INSTALL

SETTING Menu

The INSTALL SETTING menu is used for changing the settings of the projector.

INSTALL SETTING

Input A

T i l t . . .

 

V Keystone:

Auto

Imag e Flip:

Off

Background:

Blue

Lamp Mode:

Low

Image Flip

Flips the image on the screen horizontally and/or vertically.

Off: The image does not flip.

HV: Flips the image horizontally and vertically.

H:Flips the image horizontally.

V:Flips the image vertically.

Note

When the Image Flip is set to “HV” or “V”, the Lamp Mode works with “Low” setting.

Menu Items

Tilt...

Adjusts the position (height) of the projected picture. Pressing the f on the TILT adjustment key or M/, key on the Remote Commander, the more the projector tilts and the higher the position of the picture. Pressing the F on the TILT adjustment key or m/< key on the Remote Commander, the less the projector tilts and the lower the position of the picture.

V Keystone

Corrects the trapezoidal distortion caused by the projection angle. Select “Auto” for automatic correction, or “Manual” for manual correction using the < or , key.

When the bottom of the trapezoid islonger than the top : Sets a lower value.When the top of the trapezoid is longerthan the bottom : Sets a higher value.

Note

The auto V Keystone adjustment may not correct the trapezoidal distortion perfectly, depending on the room temperature or the screen angle.

Background

Select the background color of the screen when no signal is input to the projector. Select black or blue.

Normally set to “blue.”

Lamp Mode

Sets the lamp brightness in the projection.

High: Illuminates the projected image brightly.

Low: Reduces fan noise and power consumption. The brightness of the projected image will be lower compared with the “High” setting.

GB 34 The INSTALL SETTING Menu