•You can cancel the adjustment by pressing the APA key again while “Adjusting” appears on the screen.

•The picture may not be adjusted properly depending on the kinds of input signals.

•Adjust the items “Dot Phase,” “H Size” and “Shift” in the INPUT SETTING menu when you adjust the picture manually.

3PIC MUTING key

Used to mute the picture temporarily. Press again to restore the picture.

4ENTER key

5Keys emulate a mouse

Functions like a mouse of a computer connected via USB with the projector.

a)L Click key (Rear): Functions as the left button on a mouse.b)Joystick

c)R Click key: Functions as the right button on a mouse.

Note

These keys function as mouse buttons of a computer only when the projector is connected to the computer using the USB cable.

For details, see “To control the computer using the supplied Remote Commander” on page 25.

6FUNCTION 1, 2 keys (VPL-CX5 only)

When you connect the projector with a computer, you can open a file on the screen by just pressing the FUNCTION key. This will enhance your presentation. To use this function, allocate a file to the FUNCTION key by using the supplied application software.

For details, see the README file and the HELP file supplied with the application software.

Note

Connect a computer to the projector using the USB cable to activate the FUNCTION keys.

For details, see “To connect an IBM PC/ AT compatible computer” on page 18”.

7RESET key

Resets the value of an item back to its factory preset value or returns the enlarged image back to its original size. This key functions when the menu or a setting item is displayed on the screen.

8D ZOOM (Digital Zoom) +/– key

Enlarges the image at a desired location on the screen.

+: Pressing the + key once displays the icon. This icon indicates the point you want to enlarge. Use an arrow key (M/ m/</,) to move the icon to the point to be enlarged. Press the + key repeatedly until the image is enlarged to your requirements.

–: Pressing the – key reduces an image that has been enlarged with the D ZOOM + key.

9Arrow keys (M/m/</,)0MENU keyqa KEYSTONE key

Used to adjust the tilt of the projector, or the trapezoidal distortion of the image manually. Each time you press this key, the Tilt menu and the V Keystone menu is displayed alternately. Use the arrow keys (M/m/</,) for the adjustment.

qs INPUT key qd FREEZE key

Used to freeze the picture projected. To cancel the frozen picture, press the key again.

qf MS SLIDE key (VPL-CX5 only)

Used to execute the slide show. When the input signal is other than MS, it switches to MS. To begin the slide show, press the key again.

qg Infrared transmitter

GB 14 Location and Function of Controls