To connect an IBM PC/AT compatible computer

Left side

INPUT A

MENU

 

PUSH

ACCESS

ENTER

VIDEO S VIDEO

 

TEMP/FAN

 

LAMP/COVER

 

Computer

to monitor output

HD D-sub 15-pin cable (supplied)

Stereo audio connecting cable (not supplied)a) to audio output

USB cable (supplied)

(Connect the USB cable to use a wireless

to USB connector

mouse or the Projector Station.)

 

a) Use a no-resistance cable.

 

On the USB function

When connecting the projector to a computer by using the USB cable for the first time, the computer recognizes the following devices automatically.

1USB hub (general use) (VPL-CX5 only)2USB human interface device (wireless mouse function)3USB human interface device (projector control function) (VPL-CX5 only)Recommended operating environment

When you use the USB function, connect the USB cable as illustrated above. This application software and the USB function can be used on a computer loaded with Windows 98, Windows 98 SE, Windows ME, Windows 2000 or Windows XP preinstall models.

Notes

•Your computer may not start correctly when connected to the projector via the USB cable. In this case, disconnect the USB cable, restart the computer, then connect the computer to the projector using the USB cable.

•This projector is not guaranteed for suspend, standby mode. When you use the projector in suspend, standby mode, disconnect the projector from the USB port on the computer.

•Operations are not guaranteed for all the recommended computer environments.

To connect a Macintosh computer

To connect a Macintosh computer equipped with video output connector of a type having two rows of pins, use a commercially available plug adaptor. When you connect a USB capable Macintosh computer using the USB cable to the projector, wireless mouse functions become available.

Note

The supplied software does not run on Macintosh computer.

GB 18 Connecting the Projector