The INPUT SETTING Menu

The INPUT SETTING menu is used to adjust the input signal.

Items that cannot be adjusted depending on the input signal are not displayed in the menu.

For details on the unadjustable items, see page 45.

When the video signal is input

INPUT SETTING

Video

Wide Mode:

Off

When the RGB signal is input

INPUT SETTING

Input A

Adjust Signal ...

MENU Items

“Dot Phase,” “H Size” and “Shift” are displayed in a sub menu under “Adjust Signal... .”

Dot Phase

Adjusts the dot phase of the LCD panel and the signal output from a computer.

Adjust the picture further for finer picture after the picture is adjusted by pressing the APA key.

Adjust the picture to where it looks clearest.

H Size

 

Adjusts the horizontal size of picture output

 

from a connector. The higher the setting, the

 

larger the horizontal size of the picture. The

 

lower the setting, the smaller the horizontal

 

size of the picture. Adjust the setting

 

according to the dots of the input signal.

 

For details on the suitable value for the

 

preset signals, see page 46.

 

 

 

 

Shift

 

 

Adjusts the position of the picture. H adjusts

 

the horizontal position of the picture.V

 

 

adjusts the vertical position of the picture.

 

 

 

 

As the setting for H increases, the picture

 

 

 

 

moves to the right, and as the setting

 

Adjustments

decreases, the picture moves to the left.

 

As the setting for V increases, the picture

 

moves up, and as the setting decreases, the

 

picture moves down. Use the < or the ,

 

key to adjust the horizontal position and the

and

M and m key for the vertical position.

 

 

 

 

Settings

Sets the aspect ratio of the picture. When

Wide Mode

Using

inputting 16:9 (squeezed) signal from

 

equipment such as a DVD player, set to On.

 

Off: When the picture with ratio 4:3 is input.

the

On: When the picture with ratio 16:9

Menu

 

(squeezed) is input.

 

 

 

 

 

Scan Converter

 

 

Converts the signal to display the picture

 

according to the screen size.

 

On: Displays the picture according to the

 

 

screen size. The picture will lose some

 

 

clarity.

 

Off: Displays the picture while matching

 

 

one pixel of input picture element to that

 

 

of the LCD. The picture will be clear but

 

 

the picture size will be smaller.

 

Notes

•When XGA, SXGA or SXGA+ signal is input, this item will not be displayed (VPL- CX5).

•When SVGA or XGA signal is input, this item will not be displayed (VPL-CS5).

The INPUT SETTING Menu 31 GB