About the Preset Memory No.

This projector has 38 types of preset data for input signals (the preset memory). When a preset signal is input, the projector automatically detects the signal type and recalls the data for the signal from the preset memory to adjust it to an optimum picture. The memory number and signal type of that signal are displayed in the INFORMATION menu (See page 35). You can also adjust the preset data through the INPUT SETTING menu.

This projector has 20 types of user memories for INPUT-A into which you can save the setting of the adjusted data for an unpreset input signal.

When an unpreset signal is input for the first time, a memory number is displayed as 0. When you adjust the data of the signal in the INPUT SETTING menu, it will be registered to the projector. If more than 20 user memories are registered, the newest memory always overwrites the oldest one.

See the chart on page 46 to find if the signal is registered to the preset memory.

Since the data is recalled from the preset memory about the following signals, you can use these preset data by adjusting “H Size.” Make fine adjustment by adjusting “Shift.”

Signal

Memory No.

SIZE

 

 

 

Super Mac-2

23

1312

 

 

 

SGI-1

23

1320

 

 

 

Macintosh 19"

25

1328

 

 

 

The following are for the VPL-CX5 only.

Macintosh 21"

27

1456

 

 

 

Sony News

36

1708

 

 

 

PC-9821

36

1600

1280 × 1024

 

 

 

 

 

WS Sunmicro

37

1664

 

 

 

Note

When the aspect ratio of input signal is other than 4:3, a part of the screen is displayed in black.

The SET SETTING Menu

The SET SETTING menu is used for changing the settings of the projector.

SET SETTING

Input A

Smar t APA:

On

Auto Input Search: Off

Input-A Signal Sel.: Computer

Color System: Auto

Power Saving: On

Menu Items

Smart APA

Activates or deactivates the Smart APA 1).

On: Normally select this setting. When a signal is input from a computer, the APA functions automatically so that the picture can be seen clearly. Once the specified input signal has been adjusted by the Smart APA, it will not be readjusted even when the cable is disconnected and connected again or the input channel is changed. You can adjust the picture by pressing APA key on the Remote Commander even if the Smart APA set to “On.”

Off: The APA functions when you press the APA key on the Remote Commander.

1)The APA (Auto Pixel Alignment) automatically adjusts “Dot Phase,” “H Size” and “Shift” in the INPUT SETTING menu for the input signal from a computer.

Auto Input Search

Normally set to “Off.”

When set to “On,” the projector detects input signals in the following order: Input-A/ MS(VPL-CX5 only)/Video/S-Video. It

GB 32 The SET SETTING Menu