Time Zone

Select the region in which you are using the projector.

Date/Time

Set the date and time (MM, DD, YY, HH:MM).

Time Server

Enter the address of the time server when the time is set by a timer server.

Setting passwords for “Administrator” and “User”

You can set passwords for each “Administrator” and “User.”

The name of the “Administrator” account is preset to “root” at the factory. It cannot be changed.

You can specify the transmission days and times of e-mail messages (Regular report).

•Immediately report if any error occurs with the projector (Error Report).

•Send warning e-mail messages when a preset time for use of the projector lamp has been reached (Lamp Reminder).

•Send warning e-mail messages when a preset time for maintenance of the projector has been reached (Maintenance Reminder).

Notes

•When you change the password, input a new password after deleting the Password (*****) that was set.

•If you forget your password, consult with qualified Sony personnel.

Settings for the Mail Report function

You can do the following with the Mail Report function.

•Periodically report the installation status of the projector, owner information, etc.

xReport Timing fieldRegular Report

A report on the present status of the projector, installation status, etc. of the projector is periodically sent by e-mail. Set the timing for sending the e-mail messages as follows:

AT: Specify the time when e-mail is to be sent. Select the hour from the drop-down list.

Every Week on Days: Select this check box to send e-mail on the selected days every week.

Setting/Operating via Web 21