4 Press the ENTER key.

The setting menu display appears.

Network

 

Manual Mode1

Internet Protocol(IP)

 

 

 

IP Address Setting:

Manual

 

Manual Mode2

IP Address:

192.168.11.21

 

 

 

Manual Mode3

Subnet Mask:

255.255.255.0

 

 

 

 

 

Manual Mode4

Default Gateway:

192.168.11.253

 

 

 

 

 

Manual Mode5

 

 

 

 

 

 

System Setup

Exit

5 Select [Setup] to set network setting items.

Note

To use the network function, set [Standby Mode] in the Function menu of the projector to [Standard].

Projector Setting Items

When the ENTER key is pressed in the home display of the network presentation, the initial display of the setting menu appears. In the initial display, you can switch the mode to be used and change each mode settings.

Network

 

Manual Mode1

Internet Protocol(IP)

 

 

 

IP Address Setting:

Manual

 

Manual Mode2

IP Address:

192.168.11.21

 

 

 

Manual Mode3

Subnet Mask:

255.255.255.0

 

 

 

 

 

Manual Mode4

Default Gateway:

192.168.11.253

 

 

 

 

 

Manual Mode5

 

 

 

 

 

 

System Setup

Exit

Using the software keyboard

When inputting characters or numbers, the software keyboard is displayed.

1 Select a character with the v/V/B/b buttons and then press the ENTER key.

The selected character is displayed at the cursor position in the display column.

2 Repeat step 1 to input characters.

3 After you input the rest of the characters, select [OK] with v/V/B/

bbutton and press the ENTER key.

Input characters are entered and the software keyboard is closed.

To delete the character locating one space before the cursor

Select [Delete] with v/V/B/b button and press the ENTER key.

To redo the input from the beginning

Select [All Clear] with v/V/B/ b button and press the ENTER key.

All the input characters are deleted.

To enter a space

Select [Space] with v/V/B/b button and press the ENTER key.

8 Preparation