Message | PC | PJ | Cause and Remedy |
|
|
|
|
The Projector is busy. | a |
| • The projector you are trying to communicate is |
|
|
| performing turning on/off operations. |
|
|
| c After the projector operations are complete, |
|
|
| communicate it and turn it off again. |
|
|
| • The [Setting] window of the projector is open. |
|
|
| c Close the [Setting] window and then communicate it |
|
|
| and turn it off again. |
|
|
|
|
Selected PC is busy. | a |
| • The computer you are trying to communicate is |
|
|
| performing turning on/off operations. |
|
|
| c After the computer operations are complete, |
|
|
| communicate it and turn it off again. |
|
|
| • The [Option Setting] window is open. |
|
|
| c Close the [Option Setting] window and then |
|
|
| communicate it and turn it off again. |
|
|
|
|
Request for connection/ | a |
| • The [Option Setting] |
disconnection rejected. |
|
| Connection/Disconnection request is received] is set to |
|
|
| [Always No]. |
|
|
| c Set it either to [Display Confirm Dialog] or [Always |
|
|
| Yes]. |
|
|
|
|
Projector connection | a |
| • The computer cannot communicate with the projector as |
established already. |
|
| the other computer has already established |
|
|
| communications with the projector. |
|
|
| c After the projector is disconnected from the computer, |
|
|
| communicate with the projector again. |
|
|
|
|
Selected PC exceeds | a |
| • You tried to connect more than 5 projectors to one |
maximum number of |
|
| computer. |
connection. |
|
| c Reduce the number of the connected projectors to 4 or |
|
|
| less and then connect it again. (The maximum of 5 |
|
|
| projectors can be connected to one computer.) |
|
|
|
|
Projector is |
|
| • The projector you are trying to communicate is in the |
|
|
| standby mode. |
|
|
| c Turn on the projector and then try communicating it. |
|
|
|
|
No response from | a |
| • The Projector Station for Air Shot Version 2 |
projector. |
|
| communications are blocked because of the Firewall. |
|
|
| c Change the Firewall settings so that the Projector |
|
|
| Station for Air Shot Version 2 communications are not |
|
|
| blocked. |
|
|
| • Network conditions are poor. |
|
|
| c Contact your network administrator. |
|
|
| • The power cord of the projector is removed. |
|
|
| • The network cable is removed from the projector. |
|
|
| c Check the projector status. |
|
|
| • While connecting to the projector, the network cable is |
|
|
| removed from the projector or computer. |
|
|
| c Restart Windows and start the Projector Station for Air |
|
|
| Shot Version 2, and then connect the USB wireless |
|
|
| LAN module. |
|
|
|
|
Others 27