Messages on the Display

 

 

 

PC: Message displayed on the computer

 

 

 

PJ: Message displayed on the projector

 

 

 

 

Message

PC

PJ

Cause and Remedy

 

 

 

 

Now searching LAN

a

 

• The connectable LAN module within the PC is being

Module.

 

 

searched according to the priorities of the LAN modules

 

 

 

specified in the [Option Setting] window.

 

 

 

c If the message persists, check and set the LAN module

 

 

 

to be used in [Basic Setting] of the [Option Setting]

 

 

 

window.

 

 

 

 

Waiting until the IP

a

 

• The Projector Station for Air Shot Version 2 is waiting

address is set.

 

 

for the IP address to be set for the LAN module.

 

 

 

c If this message persists, check the wireless and network

 

 

 

settings for the LAN module you use. If the

 

 

 

Auto(DHCP) is selected, it may take few minutes to set

 

 

 

the IP address.

 

 

 

 

No connectable Projector

a

 

• The Projector Station for Air Shot Version 2

has been found.

 

 

communications are blocked because of the Firewall.

 

 

 

c See the “Troubleshooting” on page 24.

 

 

 

• The network setting of the projector is not identical with

 

 

 

those of the computer.

 

 

 

c Check and re-set the network setting for both the

 

 

 

projector and computer.

 

 

 

• The network segment (subnet) of the computer and the

 

 

 

projector are different.

 

 

 

c Set the PC Registration List (page 10) on the projector

 

 

 

and [Projector Setting] window (page 18) on the

 

 

 

computer.

 

 

 

• Wireless transmission conditions are extremely poor

 

 

 

when the wireless network is used for the computer.

 

 

 

c Place the computer close to the access point, or remove

 

 

 

the obstacles between the access point and computer.

 

 

 

• Network conditions are poor.

 

 

 

c Contact your network administrator.

 

 

 

 

Network communication

a

 

• The computer is unable to perform proper network

error.

 

 

communications.

 

 

 

c Restart Windows and start Projector Station for Air

 

 

 

Shot Version 2.

 

 

 

c Check the setting of the USB wireless LAN module

 

 

 

used in the Projector Station for Air Shot Version 2.

 

 

 

 

Projector communication

a

 

• The password specified with the projector is not

password error.

 

 

identical with those specified with the computer.

 

 

 

c Set the same password to the computer as the projector

 

 

 

in the [Profile Setting] of the [Option Setting] dialog

 

 

 

box.

 

 

 

 

26 Others